ATA device, with non-removable media
        Model Number:       IC25N040ATCS04-0                        
        Serial Number:      CSH405DCHNXGWB
        Firmware Revision:  CA4OA71A
        Used: ATA/ATAPI-5 T13 1321D revision 3
        Supported: 5 4 3 2 & some of 6
        Logical                max        current
        cylinders        16383        16383
        heads                16        16
        sectors/track        63        63
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:   71969781
        device size with M = 1024*1024:       35141 MBytes
        device size with M = 1000*1000:       36848 MBytes (36 GB)
        LBA, IORDY(can be disabled)
        bytes avail on r/w long: 4        Queue depth: 1
        Standby timer values: spec'd by Vendor, no device specific minimum
        R/W multiple sector transfer: Max = 16        Current = 16
        Advanced power management level: 128 (0x80)
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=240ns  IORDY flow control=120ns
        Enabled        Supported:
           *        NOP cmd
           *        READ BUFFER cmd
           *        WRITE BUFFER cmd
           *        Host Protected Area feature set
           *        Look-ahead
           *        Write cache
           *        Power Management feature set
                Security Mode feature set
           *        SMART feature set
           *        Device Configuration Overlay feature set
                SET MAX security extension
                Address Offset Reserved Area Boot
                Power-Up In Standby feature set
           *        Advanced Power Management feature set
           *        SMART self-test
           *        SMART error logging
        Master password revision code = 65534
        not        enabled
        not        locked
        not        expired: security count
        not        supported: enhanced erase
        44min for SECURITY ERASE UNIT.
HW reset results:
        CBLID- above Vih
        Device num = 0 determined by the jumper
Checksum: correct